Legerfit
The Legerfit system consists of a factory-laminated and glued Legertoit or Legerpente type 1, 2 or 3 insulation panel, plus a Retro-Fit 13 mm (1/2 in.) Johns Manville panel.
Width and length: 1219 mm × 1219 mm (4 ft. × 4 ft.)
Guaranteed permanent R value
The thermal resistance of this type of insulation is permanent due to its cellular structure which contains only stabilized trapped air. EPS performance does not diminish over time.
Installation
The insulation can be applied using adhesive or cooled bitumen, or it can be fixed to the roof surface mechanically.
Evaluation
- Certified INTERTEK ETL SEMKO
- Conforms to CAN/ULC-S126-M86 design C2, C7, C12, C25 standards
- Conforms to CAN/ULC-S107 #CR771 classes A and C standards
- CCMC number: 03240-L (except Mesures métriques à venir [4 ft. × 8 ft.] panels)