Passer au contenu

Remblai de polystyrène expansé LEGERLITE GEO40

Expanded polystyrene embankment LEGERLITE GEO40 

Blocks in various sizes made with EPS beads containing a flame retardant.

Cuts available by order

48’’ x 96’’ x 30’’
48’’ x 192’’ x 30’’

Cuts available by order

Compressive Strenght (10%)

(ASTM D1621) 275 kPa min. (30 lb/in2)


EPS beads should be considered flammable when subjected to a source of intense heat or a constant strong flame. They are vulnerable to petroleum-based solvents and prolonged exposure to ultraviolet radiation.

Ultraviolet Degradation

Prolonged exposure to ultraviolet rays will produce slight discoloration and crumbling of surface. Insulation properties will be reduced minimally unless exposure is long enough to reduce thickness. To avoid ultraviolet degradation, cover block as soon as possible.


  • Conforms to CAN/ULC-S701-01 standards
  • Conforms to CCDG 14301 standard (B1 MTQ insulation)
Physical Properties Imperial Metric TEST GEO40
Thermal resistance: r-value at 75ºF (24ºc) for 1 in (25 mm) thickness (hre.pi2 .°F) / BTU (m2 °C W) / W ASTM: C-518 C-177 0.76 m2 .°C/w/25mm (4.3 h.ft2 .°F/Btu/in)
Compressive strength (min.) at 10% distortion psi (kPa) ASTM: D-1621 275 kPa (40 lb/in2 )
Bending strength (min.) psi (kPa) ASTM: C-203 414 kPa (60 lb/in2 )
Dimensional stability: % of linear change (max.) % % ASTM: D-2126 0.50%
Water vapor permeability (max.) - (ng/Pa.s.m2) ASTM: E-96 130 ng/Pa.s.m2 (2.3 perm)
Water absorption (max.) % % ASTM: D-2842 2 %
Coefficient of linear thermal expansion ASTM D-696 6E-5mm/mm/°C 3.5 E-5in/in/°F
Usage temperature (max.) Constant Intermittent 75°C (167°F) 82?C (180°F)
Flame spread CAN/ULC S102.2M ‹ 140
Smoke development CAN/ULC S102.2M ‹ 325
Compressional modulus (min.) ASTM D-1621 9 000 kPa (1 305 psi)